Fuji Electric Spare Parts

If you have a Frenic inverter tripping on a conveyor line, an SC-series contactor welded shut in a panel or a failed IGBT module in a welding power stage, you need the reference sourced and shipped, not a catalogue to browse. We supply Fuji Electric spare parts across drives, power semiconductors, contactors, PLCs and instrumentation, including obsolete references that authorised channels no longer list. Send us the part number and we will quote condition, price, lead time and warranty.

What Fuji Electric Spare Parts Do We Supply at K2 Automation?

We supply new, reconditioned and obsolete Fuji Electric spare parts, including AC drives and inverters from the Frenic range, IGBT modules and power semiconductors, SC-series magnetic contactors and thermal overload relays, MICREX PLCs, and process instrumentation. We are an independent sourcing specialist rather than an authorised Fuji Electric distributor, and that independence is exactly what lets us reach discontinued, end-of-life and superseded references through surplus stock and our global partner network.

We hold over 300,000 parts in stock and have more than 12 years’ experience supplying industrial spares to manufacturing, process, utilities and materials handling sites. Our model is enquiry-based: you send a part number, and a dedicated account manager comes back with availability, condition, price, lead time and warranty terms in writing.

We handle unplanned breakdown cover with a line stopped, planned shutdown spares lists compiled weeks ahead, critical spares holding for single points of failure, and end-of-life stockpiling where a plant buys the last available units of a discontinued Fuji reference.

Fuji Electric Product Lines We Source

AC drives, VFDs and inverters

We source the current Frenic families and their predecessors: Frenic-Mini C2 for fans, pumps and small conveyors; Frenic-Ace E2 and E3 for general-purpose machine and process duty; Frenic-Mega G1 for heavy duty and high-torque applications; Frenic-HVAC for building services fan and pump control; and Frenic-Lift for traction and hydraulic lift control. Legacy Frenic 5000 and FVR series drives are frequent obsolete requests and we treat them as core stock, not exceptions. Model codes and voltage classes vary by region, so check the code on your rating plate against Fuji Electric’s own inverter range before ordering.

IGBT modules and power semiconductors

We source 1MBI, 2MBI, 6MBI and 7MBR series IGBT modules, intelligent power modules, rectifier bridges and thyristor modules. These sit in drive output stages, welding inverters, UPS systems and induction heating equipment. Counterfeit risk is highest in this category, so provenance and inspection matter more here than anywhere else in the catalogue.

Contactors, PLCs and instrumentation

Our SC-series coverage spans SC-03, SC-05, SC-0, SC-2N, SC-4-0, SC-5-1 and the wider SC-N range, along with matching thermal overload relays and SW-series combination starters. On the control side we handle MICREX-SX and MICREX-F CPUs, I/O cards and power supplies, plus operator interfaces and monitoring relays. We also supply pressure transmitters, temperature controllers, chart recorders and flow instruments. If a reference is not listed, we still source it on request.

Fuji Electric Product Line Comparison Table

Quote the exact reference from the unit’s rating plate, including suffix letters, because voltage class and region codes change the part entirely.

Obsolete and Discontinued Fuji Electric Parts

Can you still get obsolete or discontinued Fuji Electric parts? In most cases, yes. References that authorised distributors have removed from their catalogues are usually still available through surplus stock, decommissioned plant inventory and our vetted partner network. Legacy Frenic 5000 and FVR drives, older SC contactor variants and end-of-life power modules are the requests we see most often.

Where a reference is genuinely unobtainable, we identify the successor model and confirm mechanical footprint, terminal layout, control signal and parameter compatibility against your existing installation, flagging what has to change in the panel or the program. If replacement is not practical, we quote repair of the failed unit through our partner network instead.

We state condition plainly on every quote. New old stock is unused original inventory in its original packaging, priced highest and suited to critical spares holding. Factory reconditioned units have been stripped, had wear components replaced and been load tested. Tested surplus is used stock verified as functional, the fastest and lowest-cost route for a line that is currently down. For plant running end-of-life Fuji hardware, buy a shelf spare while units are still on the market rather than waiting for the next failure. We apply the same obsolete sourcing approach across other legacy ranges, including Siemens spare parts and Bosch Rexroth parts.

How We Source, Test and Warranty Every Part

Are non-authorised Fuji Electric spare parts genuine and tested? Ours are. Every unit comes from a vetted supplier in our global network, from decommissioned plant stock or from manufacturer channels, with provenance recorded against the order.

Before despatch we verify the part number and markings against the manufacturer’s specification, inspect for damage, corrosion and evidence of prior repair, and run powered functional testing where the item allows it. IGBT modules and power semiconductors are handled and packed under ESD control, with markings checked closely because this is the category where counterfeit product circulates most freely.

Every part ships with a 12-month warranty as standard, extendable on request, covering new, reconditioned and obsolete supply alike. Where replacement is not viable, repair through our partner network is quoted with turnaround stated upfront. One dedicated account manager owns your enquiry from part identification through to delivery, and we handle shipping and export documentation for UK and international sites.

How to Enquire by Part Number

Send us five things: the full part number from the rating plate, the quantity, the condition you will accept (new, reconditioned or any), your site location and how urgent it is. On Frenic drives the reference sits on the side or front label alongside the input and output ratings; on SC-series contactors it is moulded or printed on the front face above the coil voltage; on IGBT modules it is laser-etched on the top of the case.

You get back availability, condition, unit price, lead time and warranty terms. Breakdown and line-down enquiries are prioritised and quoted same day wherever stock allows. If you are building a shutdown or critical spares list across several manufacturers, send the whole list in one email: we also supply Allen Bradley spare parts and robotic spare parts, so mixed-brand lists come back as a single quote.

Fuji Electric Spare Parts FAQs

Are the Fuji Electric parts you supply genuine?

Yes. All parts are original manufacturer product, verified against markings and specification before despatch, with provenance recorded per order.

Can you supply obsolete or discontinued Fuji Electric parts?

Yes. Obsolete sourcing is our specialism, covering legacy Frenic drives, older SC contactors, end-of-life power modules and MICREX-F control hardware.

What warranty do you offer?

Twelve months as standard on new, reconditioned and obsolete parts, extendable on request.

How quickly can a Fuji Electric part be delivered?

Stocked references can ship the same or next working day. Sourced and obsolete items depend on partner availability, and we state a firm lead time on the quote.

Is Fuji Electric the same as Fujitsu?

No. They are separate companies with a shared corporate heritage. Fuji Electric manufactures drives, contactors, semiconductors and instrumentation; Fujitsu is an IT and electronics business. Parts are not interchangeable.

Do you supply Frenic inverters and SC-series contactors specifically?

Yes, both are core lines for us, from Frenic-Mini C2 through to Frenic-Mega G1 and across the full SC-03 to SC-N contactor range.

Send us your Fuji Electric part number and get a quote. Email the reference from the rating plate, the quantity and your site location, and your dedicated account manager will come back with availability, condition, price, lead time and warranty on the Fuji Electric spare parts you need, same day on line-down enquiries wherever stock allows. Obsolete and discontinued references welcome.