Elan Safety Relay Modules
Showing 1–12 of 16 results
Elan safety relays are the SRB series of safety relay modules built by Elan Schaltelemente GmbH & Co. KG for machine safety circuits, monitoring emergency stop buttons, interlocked guard doors, and safety limit switches on production equipment.
We supply these modules as new, refurbished, and obsolete stock on an enquiry basis, alongside the rest of our Safety and General Automation range. There is no checkout pricing on this category because condition, lead time, and availability vary by part number, so every Elan SRB enquiry is quoted individually.
We are an independent specialist supplier, not an authorised distributor of Elan or Schmersal, and all trademarks remain the property of their respective owners. With 12+ years of trading experience and access to over 300,000 new, refurbished, and obsolete automation parts, K2 Automation sources discontinued Elan modules that are no longer available through the original channel.
What an Elan SRB Safety Relay Module Does
A safety relay module monitors the safety input devices wired to it. It switches off power to the machine’s hazardous motion when a stop demand or a fault in the safety circuit is detected. In a typical installation, the Elan SRB module sits in the control panel between the safety devices and the power contactors, watching E-STOP pushbuttons, interlocked guard and safety door switches, and safety limit switches on moving guards.
Two-channel (dual-channel) monitoring uses two independent input paths, so a single broken wire, short circuit, or welded contact cannot silently turn off the safety function; the module compares both channels and detects cross-faults between them. Single-channel wiring uses a single path and provides less fault coverage.
Outputs use forced-guided (positively driven) contacts, mechanically linked so that if one contact welds closed, the others cannot change state, making a failure detectable rather than hidden. Depending on the model and wiring, the module uses either a manual reset, in which an operator presses a button after the guard is closed, or an automatic reset. A feedback loop can be wired through the auxiliary contacts of the external contactors so the relay confirms they have dropped out before allowing a restart.
Elan SRB Safety Relay Models in Stock
Check the printed label on the front face of the module for the exact reference, including any suffix after the decimal point, as variants within the same family differ in function. If the marking is worn or painted over, send us a photo of the module and the panel wiring, and we will identify it.
- SRB-C44-24V
- SRB-NA-R-C-15
- SRB-NA-R-C.1-24V
- SRB-NA-R-C.14/5-24V
- SRB-NA-R-C.15-24V
- SRB-NA-R-C.35/WE-24V
- SRB-NA-R-C.39-24V
- SRB-NA-R-C.39/ST2-24V
- SRB-NA-R-C.8/97-24V
- SRB-NA-R-C8.F-24V
- SRB-NA-RC.14-24V
- SRB-NA-RC.14/R2-24V
- SRB-NA-ST-24VDC
- SRB-ZH-2S20-24V
- SRBF-3102
If your reference is not listed above, we can still trace it through our global supplier network, so send the part number through regardless.
Elan, Schmersal, and the SRB Safety Relay Lineage
Elan Schaltelemente GmbH & Co. KG of Wettenberg developed the SRB safety relay module series and forms part of the Schmersal Group. The current catalogue equivalents are the Schmersal PROTECT SRB and SRB-E ranges, which carry forward the same SRB naming convention.
No current module should be treated as a drop-in replacement for an older Elan SRB unit. Before any swap, check the terminal numbering and wiring layout, the input configuration and reset behaviour, the feedback loop arrangement, and whether the enclosure fits the existing DIN rail space. The machine’s safety function then has to be revalidated, and under PUWER the equipment must remain safe for use after the work. Pull the live datasheet from the Schmersal product portal for ratings rather than relying on reseller listings.
Sourcing, Repair, and Warranty on Obsolete Elan Safety Relays
Many Elan SRB references are discontinued, so supply comes from three routes: new old stock, tested refurbished units, and repair of your existing module. Where no replacement exists at any price, our global network of specialists and repair centres can test and repair the failed unit, which is often faster than re-engineering the safety circuit around a current module and revalidating the machine.
Every part we supply carries a 12-month warranty as standard, extendable on request, and for line-down breakdowns we offer same-day courier dispatch where stock allows. We can quote on associated control parts such as PLC Systems in the same panel at the same time. Add the references you need to your Enquiry List, and an account manager confirms availability, condition, lead time, warranty, and price in writing before anything is committed.
Request a Quote for Elan Safety Relay Modules
Request a quote for Elan safety relay modules by adding the SRB part numbers to your Enquiry List, or Contact Us with a photo of the module label. A dedicated account manager will confirm availability, lead time, repair options, and warranty, with same-day courier dispatch available for breakdowns where stock allows.
Elan Safety Relay: FAQs
Who makes Elan safety relays?
Elan safety relays are made by Elan Schaltelemente GmbH & Co. KG of Wettenberg, Germany, which is part of the Schmersal Group. The SRB safety relay naming continues today in the Schmersal PROTECT SRB and SRB-E ranges.
What does an Elan SRB safety relay module do?
It monitors safety devices such as E-STOP buttons and guard door interlock switches. It removes power from the machine’s hazardous motion when a stop is demanded, or a circuit fault is detected. Forced-guided output contacts make internal failures detectable, and a feedback loop can confirm the external contactors have released before a restart is allowed.
Are Elan SRB safety relays still available?
Several Elan SRB references are obsolete and no longer produced. We source them from new old stock, tested refurbished inventory, and our global supplier network, so availability is confirmed per part number at the point of quotation.
Can a current Schmersal SRB module replace an older Elan SRB relay?
Not as an assumed like-for-like swap. Terminal layout, input and reset functions, and feedback loop wiring all need to be checked against the current datasheet, and the machine’s safety function must be revalidated after any change.
Can K2 Automation supply obsolete Elan safety relays?
Yes. Obsolete and end-of-life parts are our core business, and where a replacement module cannot be found, we can arrange test and repair of your existing unit through our repair centre network.